[landarts]

I have 9 days off over Thanksgiving and 17 days off over Christmas vacation. Time to wrap up this project so I can get on to the Crew Cab project I bought about a year ago. Here is a short list of what needs to get done so it can be out of the garage and back on the road. I will probably try to tackle the mechanical items left first so that I can pull it in and out of garage when needed for painting sessions. Here is a picture of how the garage and the project sits at 6:30 am this morning. Need to move a few items and get it turned sideways so I can jump in and get a few items checked off the list.

As I finish the items below, I will change each line item to match the heading color. I will pull the list forward in the rest of the post on this build thread for those who might be following.
Shooting for this to be on the road and driven on New Year's Day, so 45 days to wrap up list.


Mechanical Left
-Install new belts
-Install radiator and hoses
-Install new AC unit
-Make new battery cables and a few 2-gauge ground wires with same materials
-Install old exhaust so I can drive it to get new exhaust or buy builder kit and DIY it
-Drop of spare 205 transfer case to have rebuilt and twin sticks installed


Body Work Left
-Front fenders - wet sanded to 1500 need buffing or repaint
-Finish last 15% body work on hood: prime and paint
-Finish passenger door 25% of body work: prime and paint
-Finish driver's door 40% of body work: prime and paint
-Finish last 25% body work on bed: prime, paint and Raptor bedliner
-Body work cowl: prime and paint
-Paint both front fender wells
-Paint all four new shocks from lift kit to match body
-Body work used tailgate: prime and paint
-Install new grill and lights

Interior items
-Finish painting AC and light switch plate made from glove box, also paint radio delete plate for heater control area
-Install new seat cover
-Install new flooring and sill plates
-Install 3-point seat belts
-Install new gauge bezel, dash pad and other new goodies