The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Gas tank -- replace or move under the bed?

dsraven · 12-20-2016, 11:44 PM

measure up the space you have then take a tape to the wrecker and start looking. if you plan on an s10 convert then try an s10 tank. maybe it will work.you could always do an "in the box" tank for temp use or fab something up. like said, a rad shop can also boil out the old one but you also run the chance of pinhole leakage after. replace that rubber hose if you re-use the cab tank, as well as the rubber it sits on. inline filter somewhere accessable as well.

12-20-2016, 11:44 PM	#10
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,829	Re: Gas tank -- replace or move under the bed? measure up the space you have then take a tape to the wrecker and start looking. if you plan on an s10 convert then try an s10 tank. maybe it will work.you could always do an "in the box" tank for temp use or fab something up. like said, a rad shop can also boil out the old one but you also run the chance of pinhole leakage after. replace that rubber hose if you re-use the cab tank, as well as the rubber it sits on. inline filter somewhere accessable as well.