Quote:
Originally Posted by Steve Van Gent
see freezer trick posting!!!
|
Very cool. Anxious to see pics of how this turned out.
Btw I don't what harness you're using and how long it is, but when I ordered my harness I chose to have it made longer than standard (common option) and I have plenty of harness to run my ecm into the cab. My harness is routed through an existing hole in the firewall. I used a hole low on the driver side of the firewall kinda in between the brake and gas pedals. It is a very large hole with plenty of room for connectors to pass through. Originally there was a clutch rod block off cover over the hole. Unscrew the cover and enjoy without having to punch a large hole in your firewall
I routed my harness behind the dash and the ecm and and ALDL are in the glove box area.