The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - budget beater c10 to k30 swap over build.

sweetk30 · 10-11-2018, 09:06 PM

fuel sender changed out the ends from barb bulb to stright pipe . did this with a basic hacksaw with fine blade . then fine file to smoth edges off and clean inside for burr's . then flushed the tubes with brake cleaner . next i am about to swap out the pump for the ep381 and new sock strainer . then install the sender in the tank .

NOTE : still have to press the plastic line on the barbs yet before final install to sender unit . this was just a step by step pic of the mod .

10-11-2018, 09:06 PM	#74
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: budget beater c10 to k30 swap over build. fuel sender changed out the ends from barb bulb to stright pipe . did this with a basic hacksaw with fine blade . then fine file to smoth edges off and clean inside for burr's . then flushed the tubes with brake cleaner . next i am about to swap out the pump for the ep381 and new sock strainer . then install the sender in the tank . NOTE : still have to press the plastic line on the barbs yet before final install to sender unit . this was just a step by step pic of the mod . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.