Quote:
Originally Posted by aotte1
Jeff,
Your fender looks great!
On the new fenders, my plan is to cut and weld in gas door. The fender numbers are L-37345 and R-37349 that I am looking at.
My steps are good.
Bedside to fender bolts, I am not sure if I can get them out? Mine are torx like. A T40 is to small and T45 is to big. Research may indicate the bolt heads maybe "torx plus" which is bigger for each side. I ordered one to see if it fits. If the new torx plus socket does not work, then will have to drill/cut out.
My side angle wood hold down bolts are permanently attached too. I was able to remove nuts on all except for two which broke. For the broken ones thinking of using a coupling sleeve to extend the bolt. I think I got them before at Lowes or Home Depot.
Below is picture of my side bolts.
|
Thats what mine were like too i had 2 different bits that fit i twisted one and broke the other one then decided to drill them out