The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - cranks but no spark

blabla914 · 09-05-2018, 06:45 AM

Just wanted to say thank you to both of you.

Been working at replacing terminals. The one behind the powersteering pump was barely hanging on by a thread.....and green where the wire connects to the terminal. Just soldering on a new connector here got it running!

I still have the U1000 class 2 data link malfunction and now I have P0449 EVAP vent solenoid control circuit codes, so a bit more work to do, but running is good.

Thanks again,

Kelly

09-05-2018, 06:45 AM	#8
blabla914 Registered User Join Date: Aug 2018 Location: Southington CT Posts: 6	Re: cranks but no spark - tough problem for you Just wanted to say thank you to both of you. Been working at replacing terminals. The one behind the powersteering pump was barely hanging on by a thread.....and green where the wire connects to the terminal. Just soldering on a new connector here got it running! I still have the U1000 class 2 data link malfunction and now I have P0449 EVAP vent solenoid control circuit codes, so a bit more work to do, but running is good. Thanks again, Kelly