|
Re: Columbus..the 1957 IH 4x4..
getting ready to mock up the mounts for the power steering box and thought I'd go ahead and reinforce the frame rails...for some unknown reason they narrowed the frame rails down to 1in wide on the top side over the axle and right where the motor mounts will be....
some 1/4×2 flat bar did the trick once I hammered it around to fit the frame contour.....
now I got to figure how to mount the steering box.....the IH frame is 7in wider than the gearbox donor frame...so itll need recessed into the frame a little.....
|