|
Re: Swaping to a 700R trans
The stock bracket bolted to the frame can be swung forward to realign the linkages.
Just loosen the top bolt, take out the lower bolt, redrill new hole and bolt in lower bolt.
It 's not perfect but has worked for me since I did this conversion back in 1999.
Yellow outline is where the bracket is from the factory. And then after it's been relocated.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension.
Petrolia,Ontario,Canada but working in Port Huron,MI.
See ALL my Blazer pic's HERE
|