The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bdiamond · 01-15-2018, 09:41 PM

Could you have a machine shop slug the hole and redrill it the other way? I'm thinking drill the hole to a uniform diameter, machine a slug a few thousandths bigger so it'll be a press fit then redrill the taper on the other side.

01-15-2018, 09:41 PM	#11
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: Tie Rod Flip (to lessen bumpsteer) Could you have a machine shop slug the hole and redrill it the other way? I'm thinking drill the hole to a uniform diameter, machine a slug a few thousandths bigger so it'll be a press fit then redrill the taper on the other side.