Re: New Gear Vendors Controller Wiring
Quote:
Originally Posted by mjervis
Hi, just wondering where you ran the power for the box to on your fuse box, mine says to run it to a fuse that is on during auxiliary but off during crank.
|
I took a electric probe and tested the fuse with the key off and the in ACC and then in start. It ended up being the "IGN" fuse location on my fuse box. If you read below on one of the comments there is a guy that hooked is up directly to the battery with a delayed fuse. If I can get him to explain to me how he wired it up I will rewire mine. Not that there is anything wrong with where it is at now, I would just much rather have the power strait from the batter if I could. Hope this helps!
__________________
1972/Sierra Grande k2500 / 383 / th350 with Gear Vendors / 4.11 / 4" lift with 35s / Eaton Rear Axle
|