Re: *** 400/406 sbc BUILDERS PLEASE READ ***
I've built a few 400's and you are gonna love the torque. I have a few tips for you.
1. Have the block surfaced/squared. 400's are bad about not being square. This is why people have head gasket issues.
2.Have it aligned honed. You will need a special rear main seal.
3.Don't use the stock 5.65" rods. Use at least 5.7" rod.
4.Modify your Vortec's for at least 525 lift.
The last one I did I used a Lunati Voodoo cam 504/525 lift with some AFR 195 heads and it is a great all around combo. Its in a 69 Camaro w/ a 5 speed. I would go one size smaller on the cam for a truck.
|