The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MTCK · 11-14-2012, 01:36 AM

Thanks Larry! Did I read a rumor about a D60 swap? Don't keep us hanging, it is winter and we need our BigAssGas project!

Yo MSGROSS, no steering arm or drag link yet. All the pics I posted of the drivers side that show the arm are with the axle unsupported, at full droop. The drag link isn't perfectly level, but not nearly as bad as shown in those pictures. My plan is to let the springs settle a bit, then measure and see what I need to do to get the steering geometry back in line.

11-14-2012, 01:36 AM	#29
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: 1977 K10 2" Lift Install Thanks Larry! Did I read a rumor about a D60 swap? Don't keep us hanging, it is winter and we need our BigAssGas project! Yo MSGROSS, no steering arm or drag link yet. All the pics I posted of the drivers side that show the arm are with the axle unsupported, at full droop. The drag link isn't perfectly level, but not nearly as bad as shown in those pictures. My plan is to let the springs settle a bit, then measure and see what I need to do to get the steering geometry back in line. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck