Quote:
Originally Posted by hewittca
Cutting your 3" drop springs to get an additional 4" of drop to get to your 25" mark is a huge drop on a spring. I've seen plenty of trucks dropped on spindles plus 2-3" drop springs that sit nice with no wheel gap. I would still suspect something isn't quite right with yours because it looks high.
|
Well from everything I've been reading on the internet polyurethane bushings may have some binding issues I did notice that they tightened up the upper and lower control arms with the truck in the air so I am going to loosen the upper and lower control arm and lower the truck weight on the A-Arms and see if that will bring the truck down and if it does I will tighten it and problem solved if not I don't know what it could be