[SCOTI]

Originally Posted by loujizzel

Well from everything I've been reading on the internet polyurethane bushings may have some binding issues I did notice that they tightened up the upper and lower control arms with the truck in the air so I am going to loosen the upper and lower control arm and lower the truck weight on the A-Arms and see if that will bring the truck down and if it does I will tighten it and problem solved if not I don't know what it could be

Also.... It could be that the drop springs you put in aren't the correct spring (it wouldn't be a first). I always opt to use drop spindles w/the original coils first (w/1-coil removed). Then, if I feel the spring rate is too soft for the drop, I swap to a higher rate spring w/similar dimensions. I've never used an aftermarket 'drop' coil unless they provide me w/the springs rate. Most 'kits' don't provide the info; aftermarket spring providers will.