[Pontiacgurudan]

The wiring looks pretty straight forward, the speedo is the newer one touch programmable. Put it in program mode, drive exactly one mile and press the button. That's it, no pace car, no dip switches, just a button. I'm going to hook all the necessary wires from the gauges to a large single plug I scavenged from a motorcycle wiring harness, then wire the other side of the plug to the truck that way my dash is one plug removable. The sending units are all standard single wire except the wires going to the speedo pickup. I'm combining the 90 ohm fuel sending unit included in the kit with my stock pickup in the tank. When I pull the bed off to install a suburban tank with the internal fuel pump, the Dolphin gas gauge will work with the later model sending unit. More pics to come.