The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68 TT · 09-26-2011, 06:21 PM

I finally got back to work on the stepside.

Yesterday I pulled the C2500 disc brakes off the 67 C10 longbed and put the old stepside front drum brake setup onto it. I pulled the C2500 disc assembly apart and cleaned & painted the spindles & rotors.

I installed the new C2500 upper & lower ball joints into the painted C20 lower & C10 upper A-arms this morning then put them on the stepside.

After the A-arms were bolted in place I installed the stepside front springs, C2500 spindles & rotors then installed the Cragar Soft-8 wheels on the front and put it back on the ground.

09-26-2011, 06:21 PM	#45
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 69 C10 swb stepside project 45 ACP I finally got back to work on the stepside. Yesterday I pulled the C2500 disc brakes off the 67 C10 longbed and put the old stepside front drum brake setup onto it. I pulled the C2500 disc assembly apart and cleaned & painted the spindles & rotors. I installed the new C2500 upper & lower ball joints into the painted C20 lower & C10 upper A-arms this morning then put them on the stepside. After the A-arms were bolted in place I installed the stepside front springs, C2500 spindles & rotors then installed the Cragar Soft-8 wheels on the front and put it back on the ground. Attached Images __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars