The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**lks dcvn** · 03-04-2010, 04:40 PM

I bought a set at harbor freight since I started doing my stuff - they work OK and do provide some assistance...

They are like $5 or $6 for 8 or 10 of them (at HF) - way cheaper than the other places I looked at. I can get a part number off them when I get home tonight if that helps.

If you can get to the back of the panel you are welding - they can be helpful - several of the areas I have tackled I didn't have clear access to the back of the panel to use them...

Found the part number [44751] - http://www.harborfreightusa.com/usa/...o?itemid=44751

03-04-2010, 04:40 PM	#88
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: Left for dead: 72 2wd blazer build I bought a set at harbor freight since I started doing my stuff - they work OK and do provide some assistance... They are like $5 or $6 for 8 or 10 of them (at HF) - way cheaper than the other places I looked at. I can get a part number off them when I get home tonight if that helps. If you can get to the back of the panel you are welding - they can be helpful - several of the areas I have tackled I didn't have clear access to the back of the panel to use them... Found the part number [44751] - http://www.harborfreightusa.com/usa/...o?itemid=44751 Last edited by lks dcvn; 03-04-2010 at 04:44 PM.