Quote:
Originally Posted by dsraven
of you have you air chisel out anyway, why not just use that with a sheet metal cutting tip to cut the bulk of the roof off, then go after the spot welds with a flat chisel and see how it works. go inline with the gutter if possible for less chance of distortion or a goof up that will bend the gutter rail. if too aggressive then use a grinder on the spots that don't wanna seperate. you can cut pretty close to the gutter with a sheet metal tip so it should be just a strip of metal stuck to the rest of the body at the drip rail.
|
Both good tips, excited to get home and start Did some reading, may be worth the cost to get the 3m panel bonding/gun. Will help seal and less warpage?......y'all are awesome, many thanks, Kel