The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Magic Bus · 04-18-2018, 07:37 PM

I have a problem with my rear brakes on a 1965 C30 panel. It has the stock rear end. When I bought it the RR brake was locking up. We did a complete brake job, replacing everything, front, rear and master cyl. The problem is, on both sides of the rear brakes, the shoes will not come together all the way. The top is spaced out about 1/8". It was that way when we took it apart too. The wheel cly's are new, from NAPA. It seems that the wheel cyl are not collapsing all the way. Are there different wheel cyl for this truck? The new ones are the same as the old ones.

04-18-2018, 07:37 PM	#23
Magic Bus Registered User Join Date: Mar 2017 Location: Yakima Wa Posts: 27	Brake problem I have a problem with my rear brakes on a 1965 C30 panel. It has the stock rear end. When I bought it the RR brake was locking up. We did a complete brake job, replacing everything, front, rear and master cyl. The problem is, on both sides of the rear brakes, the shoes will not come together all the way. The top is spaced out about 1/8". It was that way when we took it apart too. The wheel cly's are new, from NAPA. It seems that the wheel cyl are not collapsing all the way. Are there different wheel cyl for this truck? The new ones are the same as the old ones.