The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1968 chevrolet truck power steering conversion

blue betty · 04-22-2011, 10:34 PM

Hi there, I just did this conversion in my 67. Besides the used gear box, rebuilt pump, new hoses, bolts, belt, pulley, new pitman arm and new rag joint (old one was destroyed taking it off, grinded the rusty bolts off much faster). Thats about all I needed pretty quick and simple installation. Took me about three hours with no air tools. Oh and I got an alignment done after as well. Runs great so easy to steer now, almost to easy one finger. I should have did this years ago. Good luck

04-22-2011, 10:34 PM	#2
blue betty Registered User Join Date: Sep 2005 Location: Ontario Posts: 41	Re: 1968 chevrolet truck power steering conversion Hi there, I just did this conversion in my 67. Besides the used gear box, rebuilt pump, new hoses, bolts, belt, pulley, new pitman arm and new rag joint (old one was destroyed taking it off, grinded the rusty bolts off much faster). Thats about all I needed pretty quick and simple installation. Took me about three hours with no air tools. Oh and I got an alignment done after as well. Runs great so easy to steer now, almost to easy one finger. I should have did this years ago. Good luck __________________ 1967 GMC Fleetside. (Betty) 1985 Chevy Shortbox 4X4.(Freddy)