Got the starter installed last night and tried to start the truck but it wouldn't fire. Finallly unhooked the hot lead in the new HEI wiring harness and attached my old hot lead to the HEI and fired right up.
Next i went to work on the interior. Got my rear seat brackets in place to raise the rear of the seat up about 1", then laid the carpet back down and installed the driver's seat. Prior owner had the driver's seat installed with wood blocks to raise the rear of the seat and a total of four bolts for the whole seat. Needless to say, it was wrongly installed then and properly installed now.
Next up, finish power steering and hopefully go for another test drive!