[reaper71]

Pic #1 is as she was pulling in the shop stock ride height etc.
Pic #2 front end coming off to reveal the beginning of the problems!
Problem #1. after taking measurements of the front axle placement is is very close to the firewall. So when we wanted to just drop a mustang II style front end under it the cross member was in the middle of the oil pan!
At this point there was no real solution using the 49 technology...So...out comes the motor and trans..And it did NOT want to come out!!
come to find out the Dodge has a 2 piece floor at the toe board so this made things a bit easier.

Mark...