The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Replacing intake manifold gaskets on a 98 Silverado

graywolf · 03-04-2004, 05:56 PM

gm and ford also say do not use the 3m roloc fiber pads on a angle die grinder to remove gasket material on aluminum surface, ford says use plastic gasket scraper, gm says you can use die grinder with white roloc bristle disc,120 grit

03-04-2004, 05:56 PM	#9
graywolf Registered User Join Date: Mar 2004 Posts: 15	gm and ford also say do not use the 3m roloc fiber pads on a angle die grinder to remove gasket material on aluminum surface, ford says use plastic gasket scraper, gm says you can use die grinder with white roloc bristle disc,120 grit