View Single Post
Old 06-14-2011, 11:52 PM   #3
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

Next the Rear output shaft can be removed. There are roller bearings inside the output shaft assembly. They have a snap ring to keep them in place, but still use caution not to lose them.



Next I removed the front output seal housing



Next I pulled the front output bearing. There is a spacer/oil slinger behind the bearing.





Next I removed the rear bearing cover for the front output. There are more needle bearings so make sure you have all of them.





Next I pulled the front output shaft assembly. The shift collar and high gear stay in for now.



Next the shift collar and high gear come out. I reassembled the whole front output assembly to keep everything together.





__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote