|
Re: 1074 C10 Fuel Tank - LSx Swap
There is a difference in the later model tanks that you might not be aware of. The fuel fill inlet port is 1 3/4" vs. a 1 1/2" inlet on the earlier models. I found this out when I did my LS swap. Despite all the different ways to overcome this obstacle, as found on the internet, the fix is easy and inexpensive. The filler neck is actually 1 3/4". It's the hose that tapers down to the smaller size. Here are some pics of the Gates fuel hose to get and where to cut it to fit
|