Quote:
Originally Posted by LynnJr
TipShep
Any 4x4 tranny from a 1990 -1995 will bolt right up and will work.You must get the shift tower with the tranny as they changed but they will still work.One is short with a big tower and the other is taller with a shorter tower.
They are patterned after the old ZF trannies and shift just like a car not a truck.
You can use the cast iron heavy duty truck tranny if you like granny low I don't and I probably 4 wheel more than the next 15 guys you'll meet.
If you make the swap tell the wrecker you need one out of a V8 or you'll be buzzing the motor up too much with a V6 tranny.
Lynn
|
So what your saying is than switching from the 700r4 automatic to a 5 sp. manual you won't have to change out the rear tail
shaft so the match to the transfer box
uses both the manual and the automatic Shaft are the same diameter and spline count??/
