01-13-2016, 05:12 PM
|
#36
|
|
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,483
|
Re: Got Me some Camel Humps!!
Found your other post.
Quote:
Originally Posted by jokerz71
I agree.That cam is way too big for a 283 unless you are using for strip only.Even then you're gonna need alot of stall & some really low gearing,along with more compressionto get that cam into it'operating range.
A really good head for the 283/307 is the L30/305 Vortec head.Castin g #059. These are a 58cc head & they will flow approx 220 cfm @ .500 lift with 1.84/1.5 valves.The chambers are not as efficient as the L31 heads, but, they work very good on small inch motors.Just like their big brother, the L31, they will need a Vortec specific intake.
EDIT: Sorry.I missed the part where you got it fixed !!! LOL.
|
|
|
|