[8man]

I've got a 48 going on an S10 frame with a 350. There is about 1.75" clearance between the oil pan and the cross member. The block hugger headers on the 350 exit straight down in the middle and are just too close to the A-arms and the starter.

I was looking at these https://s10v8.com/s10-v8-headers/s10...coated-headers and was wondering what others have used to make the clearances work.

I did spend hours yesterday and today using the search feature and I'm still not sure which ones will work, so I'm looking for some help.

Thanks.