The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jbclassix · 06-15-2011, 12:14 AM

Next I removed the snap ring that holds the input bearing on the input shaft. This one is the 27 spline type that mates to the TH350.

Next I removed the front bearing and pulled the input shaft out. I could not get the input shaft out without first removing the shift fork.

06-15-2011, 12:14 AM	#5
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: NP 205 Rebuild and Info Next I removed the snap ring that holds the input bearing on the input shaft. This one is the 27 spline type that mates to the TH350. Next I removed the front bearing and pulled the input shaft out. I could not get the input shaft out without first removing the shift fork. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205