The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hooker Headers

dingo_dan_22 · 12-31-2007, 05:31 PM

These are some hooker headers part # 2451-1.

They would work great if the engine was in the I6 position, however in the V8 position they hit the drivers a-arm so I did a little pounding. I didn't have to cut the frame though. I built my own transmission crossmember to run the exhaust through the frame. I still need to blast holes in the trailing arm crossmember and weld in some pipe to run the exhaust right out the back.

12-31-2007, 05:31 PM	#1
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Hooker Headers - Progress Pics These are some hooker headers part # 2451-1. They would work great if the engine was in the I6 position, however in the V8 position they hit the drivers a-arm so I did a little pounding. I didn't have to cut the frame though. I built my own transmission crossmember to run the exhaust through the frame. I still need to blast holes in the trailing arm crossmember and weld in some pipe to run the exhaust right out the back. Attached Images __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop