[clinebarger]

Remove Pump Thimble Filter, Install with new filter & O-ring from the Seal Kit (234 & 235 in Diagram above)

Align the 2 Square shapes circled in the Pic's below. Bolt the 2 Pump Halves together FINGER TIGHT!!
If the Pump to case seal is still intact, Remove it.

**Pump Alignment without a tool**
Install the pump UPSIDE DOWN in the Case.
Start all Pump to Case Bolts.
Torque the Pump Half bolts to 18 ft. lbs.
Remove Pump from Case
Install new Pump to Case Seal.

Finally done with the Pump.