[QUOTE=swierker;4087905]I used the ECE kit years ago. I did a 4 inch drop so I got the adjustable panhard bar, not the trackbar that attaches to the TA.
My memory is kind of fuzzy but I THINK that the panhard bar might attach to a different location with the shock relocator kit.
I would talk to them again about the panhard bar because I might be wrong. The track bar is only meant for drops of more than 4".
But if you're looking to get a 5 bolt lug out of an anything other than a 71-72 AND run stock height AND use coil springs, you would have to find some way attach the panhard bar.
Ok, now after writing all that out I see your problem. I've also heard others mention an axle swap or redrilling the axles for 5 lugs.
[/QUO
Track bar or panhard bar...........the same??
If I use the 1991 10 bolt, yes I will need a panhard bar and have to figure out a way to attach it. Everything else ( weld on perches etc.) will be easy.
I am running stock height rear coil springs.
So ECE said that their track bar kit / panhard bar is for lowered trucks only.
So if their kit doesn't work, I'm gonna need to find a way to attach the panhard bar as the 10 bolt doesn't have the stud for the stock panhard bar!