|
Re: LT1 GenV swap
Low side a/c line assembled and needs to be crimped. The ac crimper I have doesn't have #12 reduced barrier dies so I need to get a shop to take care of that and then the a/c is done!
I reused the low side hose from the 2015, way more flexible than standard barrier hose.
Got side tracked on another idea, and looks slick!
More than likely going to paint the emblem black to match the one on the cab trim. Was looking for a smooth flat center cap for a subtle mod to accent the brake upgrade.
Clint
Tried to scrape off the orange sticker but it was a paint of some sort.. little acetone took the orange right off.. wonder if OE are the same?
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
Last edited by 87chevy.com; 01-12-2019 at 08:59 PM.
|