Re: Check my gear pattern :)
Quote:
Originally Posted by superhondaz50
Got backlash at .009, spec is .006-.10 so on the higher end but in range, I'll measure shims and see if I can get it to .007 or .008
|
.009 will work just fine.....as good as your pattern is....it should run quietly...not every one agrees but the guy who taught me....always put the vehicle on jack stands and ran it for about 30 minutes to warm it up...then let it cool slowly...and you're good to go....did you replace the carrier bearings?
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
|