The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ChadW · 11-29-2018, 03:28 PM

Have a cpl questions regarding the pcv setup for a 327...I have the little "dixie cup" attachment for the block and was planning to use it with a hose off of it to a inline pcv valve and connect it to the carb or carb spacer...I am running a performer intake and there is no oil filler neck/breather. So i take it this means i will need to run a breather on my valve covers, correct? Am i setting this up right? do i need breathers on both valve covers?

11-29-2018, 03:28 PM	#1
ChadW Registered User Join Date: Jan 2018 Location: Danville, IL Posts: 160	1964 327 pcv setup Have a cpl questions regarding the pcv setup for a 327...I have the little "dixie cup" attachment for the block and was planning to use it with a hose off of it to a inline pcv valve and connect it to the carb or carb spacer...I am running a performer intake and there is no oil filler neck/breather. So i take it this means i will need to run a breather on my valve covers, correct? Am i setting this up right? do i need breathers on both valve covers?