12-01-2011, 06:29 PM
|
#16
|
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: Got Me some Camel Humps!!
Chevy 1969 Corvette 350ci 4 Bolt Main (.30 over)
Cast Iron LS9 3970010
Engine Works 135290H - Camshaft Hydraulic Dual Pattern
Lopey Idle - .445/.465 Lift
Designed to suit the needs of entry level race classes
Idle = Lopey RPM Range = 2200 to 5800
Torque Peak = Mid Adv. Duration = 288/289
Duration at .050 = 214/224 Lift = .445/.465
Centerline = 107/117
KB Pistons 1479H-030 - Silv-O-Lite
Hypereutectic Pistons
Crankshaft Nodular Cast iron
10.5:1 Compression Ratio
Heads - 1968 Chevrolet Corvette
327 Double/Camel Hump
3917291 - 327 - 1968 Corvette - 350hp w/temp unit hole
New Springs – 1969 – Z28
New Stainless Valves
Manley 1.94 Int / 1.50Exh
Hardened Exh Seats
Setup to 490 Lift
New Retainers and Locks
New Guides
Wish they had Thumpr™ Cams back then......
I don't want to pull my engine back apart now if I bought one.
www.compcams.com/Thumpr/index.html
https://public.bay.livefilestore.com...A/IMAG1155.jpg
https://public.bay.livefilestore.com...IMAG0266-1.jpg
Last edited by 1Bad62Pro/Street; 12-01-2011 at 06:36 PM.
Reason: typo
|
|
|