The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need help with plan for chassis priming/painting

Alex V. · 03-10-2017, 12:45 AM

Ditto - the directions for the Transtar 1:1 ratio epoxy primer I used was 35-45 PSI and I ran it about 45. Here's the result:

Sprayed the first coat of Rust-Oleum Farm & Equipment satin black enamel after I moved it inside this evening - after thinning the enamel (so darned thick straight out of the can I could barely move the gun at a regular rate and have any coverage) I'm liking the result. The epoxy's 10 minute recoat/30 minute topcoat time is real nice.

03-10-2017, 12:45 AM	#20
Alex V. Registered User Join Date: Mar 2013 Location: Campbellsville, KY Posts: 888	Re: Need help with plan for chassis priming/painting Ditto - the directions for the Transtar 1:1 ratio epoxy primer I used was 35-45 PSI and I ran it about 45. Here's the result: Sprayed the first coat of Rust-Oleum Farm & Equipment satin black enamel after I moved it inside this evening - after thinning the enamel (so darned thick straight out of the can I could barely move the gun at a regular rate and have any coverage) I'm liking the result. The epoxy's 10 minute recoat/30 minute topcoat time is real nice. __________________ Alex V. ------ 1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs. 1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.