The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Drive Line Placement

MD2020 · 12-01-2018, 01:45 AM

I agree with the first answer and I did not read much more.
But pinion angle with 500 horse power
with leaf springs
or with 4 bar
or with Ladder bars
or with 4 LINK are all different AT RIDE HEIGHT.
My drag car was Ladder bars and the pinion angle at the rear yoke was 2/3 degrees. @5000.00 RPM launch it was basically 0

https://www.hotrod.com/articles/91758/

12-01-2018, 01:45 AM	#24
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 312	Re: Drive Line Placement I agree with the first answer and I did not read much more. But pinion angle with 500 horse power with leaf springs or with 4 bar or with Ladder bars or with 4 LINK are all different AT RIDE HEIGHT. My drag car was Ladder bars and the pinion angle at the rear yoke was 2/3 degrees. @5000.00 RPM launch it was basically 0 https://www.hotrod.com/articles/91758/ Last edited by MD2020; 12-01-2018 at 08:39 PM.