The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Yukon Jack** · 01-19-2007, 05:12 PM

Mine is aluminum as my buddy had some lying around. I used some countersunk phillips head machine screws. I would think pop rivets would be fine as the master cylinder also secures the plate to the firewall. It probably wouldn't need anything other than the master cylinder bolts now that I think about it.

01-19-2007, 05:12 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: My hydraulic clutch and Hydroboost setup Mine is aluminum as my buddy had some lying around. I used some countersunk phillips head machine screws. I would think pop rivets would be fine as the master cylinder also secures the plate to the firewall. It probably wouldn't need anything other than the master cylinder bolts now that I think about it. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 01-19-2007 at 05:14 PM.