The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - pdx-sanity66

**pdxhall** · 11-14-2018, 04:34 PM

Progress: inner fenders painted and installed. under dash wiring is almost ready for the gauge panel to be installed. steering column rebuilt [again]. It was hastily put together to move Sanity to Tucson. Complete tear down this time with all new bearings. I removed unnecessary hardware for starting. New turn signal cam and harness, operating hazard flasher, new tilt and turn signal arms, and steering wheel lock for added security. The column has been repainted and remounted with all hardware.
The cab floor is finished except for the carpet. The entire floor and up the back wall has been stripped, epoxy primed, coated with Lizard skin, and the area from under the seats to up the back wall sprayed with Raptor bed liner.

11-14-2018, 04:34 PM	#643
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,059	Re: pdx-sanity66 Progress: inner fenders painted and installed. under dash wiring is almost ready for the gauge panel to be installed. steering column rebuilt [again]. It was hastily put together to move Sanity to Tucson. Complete tear down this time with all new bearings. I removed unnecessary hardware for starting. New turn signal cam and harness, operating hazard flasher, new tilt and turn signal arms, and steering wheel lock for added security. The column has been repainted and remounted with all hardware. The cab floor is finished except for the carpet. The entire floor and up the back wall has been stripped, epoxy primed, coated with Lizard skin, and the area from under the seats to up the back wall sprayed with Raptor bed liner. Attached Images __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.