Routed lines, still need to weld on brackets to support them:
Parkiing brake brackets I made from plate steel:
Put rear bumper on, have to drill a couple more holes in frame though
Put 1" blocks in the rear to level out the truck. Rear was always higher than the front by a couple inches but the 2.5 skyjackers were more like 3.5 inches of lift, hoping they settle a little more yet.
Letting lube flow out to both hubs:
Took it for a drive in the field Saturday and hualed some stuff out back. 4wd works good but I should have rebuilt the double cardan joint since it knocks some. Figured it may be coming out before too long anyways when I yank the t case to regasket/reseal it.
Was dragging diffs in the snow a little. It sure is a one wheel wonder in 2x4 mode, need to get a no spin installed!
MC painted with Eastwood brake gray (supposed to be fluid resistant) .
Brake booster is shot, luckily Oreillys had one, got it painted and need to bolt in. Look at the broken spring in the shot booster, this was from the running rusty 72 K20 parts truck. How does a spring break in so many places!!:
