The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 71-72 rear spring hangers on 69 frame

**71blksuper4x4** · 09-29-2015, 08:26 PM

Bolt your springs on your hangers and line up the rear most hangers with existing holes in the frame as those don't change through the years. Go ahead and bolt those in and jack up the frame until you can position the front hangers below the frame. Then lower the frame on the front hangers. That should tell you where they should be.
Here is a pic of the two front hanger styles for the rear.

09-29-2015, 08:26 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,148	Re: 71-72 rear spring hangers on 69 frame Bolt your springs on your hangers and line up the rear most hangers with existing holes in the frame as those don't change through the years. Go ahead and bolt those in and jack up the frame until you can position the front hangers below the frame. Then lower the frame on the front hangers. That should tell you where they should be. Here is a pic of the two front hanger styles for the rear. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 09-29-2015 at 08:34 PM.