Re: Inner rocker panel
ok the inner rockers will replace what you need! in picture #4 the top edge were it comes down to were you cut, thats where the new inner rocker will be welded! at that edge before it dips down! take a wire wheel to the top of the floor before it dips down and knock off that bondo and make sure you dont need any other floor patch or to make a patch! i dont have any pictures of my patches i did! but my floor didnt need much but a couple small patches smaller then 4-6in. squares, the driver footwell patch, and outer rockers! i still need to do the footwell patch and my rockers! but anyways i would take a wire wheel to the floor and make sure you dont need anything else! that bondo could be hiding alot or someone could have used alot of bondo for no reason!!
|