Quote:
Originally Posted by chiefcfd
The power wire should be grey and plug in the fuse panel. I think it plugs into "panel light" spade. I don't know the bulb number. It is part of the Turn signal switch.
|
Quote:
Originally Posted by FirstOwner69
Not true for the tilt columns.
Tilts use #1445 bulbs along with the other 2 parts in the attached picture placed under the gear indicator as hdff stated in post 1.
The gray light wire plugs onto the "PNL LTS" spade on the fuse block as I recall. I can confirm that tomorrow.
|
Thanks, I'll go get a 1445 bulb today and look for the gray wire at the column . I have the silver domed piece but not the green piece, and I assume it is not sold aftermarket, does it go inside the silver domed piece? Does the gray wire go direct from the column to the fuse block or tie into the wire harness with the rest of the panel lights?