The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pestwagon · 04-30-2010, 11:40 PM

Captain Fab- I have a 66 C-10 with stock 292. I am adding a factory 292 P/S bracket and pump...Now I need to put in a new gear box. I also need instructions and a new drilled out rag joint flange. Can I use my existing steering tie rods and center link? Will it turn equally as sharp to the R or L? Or will it end up steering funny as I have read here posted from others who converted theirs. Like easier to go right than left, etc?

04-30-2010, 11:40 PM	#59
pestwagon Registered User Join Date: Feb 2010 Location: Los Banos, CA Posts: 390	Re: Power Steering Adapter Plates Captain Fab- I have a 66 C-10 with stock 292. I am adding a factory 292 P/S bracket and pump...Now I need to put in a new gear box. I also need instructions and a new drilled out rag joint flange. Can I use my existing steering tie rods and center link? Will it turn equally as sharp to the R or L? Or will it end up steering funny as I have read here posted from others who converted theirs. Like easier to go right than left, etc?