Quote:
Originally Posted by trukman1
One more question this brought up...what is "planishing?" Also hear of "proud" when welding. What does that mean? Thanks for the education.
|
Planishing is effectively stretching a weld bead or “dot”. When welding sheet metal you want to just weld in one spot for half a second and skip around. This will produce a weld dot as seen in the above pictures. With any weld you have shrinking as the weld cools, when the cooling happens it pulls the surrounding metal and creates a valley. To planish you use the dolly on method and focus only on the weld dot to stretch the dot out, in doing this you are stretching the dot out and moving the surrounding metal back into it’s previous location. Weld proud is the height of the weld bead above the base metal, in the above pictures the weld bead/dot was above the sheet metal, that portion was ground down flush to the base metal to have the appearance of a seamless piece of metal, after planishing. Hope this helps and didn’t further confuse you.