WHEW!!!! All rivets FINALLY removed! For the rear section anyway. I also finally put all the used parts in a plastic bin and scrap metal in another and cleaned up a bit to have a somewhat clean workspace.
C-notches cut out, but wrestling with the lower section of the plates to get them lined up.
Front trailing arm mounts are loosely bolted in, along with the trailing arm links.
Since I was at a standstill with the C-notches, I decided to go ahead and move forward with the rearend. Fluid drained, rear drum assemblies removed, new CaptainFab rear disc brackets installed, torque arm plate temporarily installed. I may go ahead and clean and paint the rearend and torque arm bracket and finish it up. I see no reason for any of this to come back off.
