[shearjs]

Rob,

Here are the fittings I used on my hydroboost setup. The power steering pump already had two return ports, so I didn't have to add a return or T the two return lines. I used 10' of Powerflex teflon -6 hose (RUS-632620).

Steering box fittings: RUS-640380 5/8-18 TO -6
RUS-648050 11/16-18 TO -6

PS Pump fittings: RUS-648060 16MMx1.5 to -6

Hydrooboost fittings: RUS-670531 16MMX1.5 MALE adapter to -6
RUS-670541 18MMx1.5 MALE adapter to -6

Pressure Hose ends: RUS-620421, Endura Hose end -6 90 degrees.

I just used rubber hose for my return lines, and the hydroboost and steering box both already had a hose barb fitting for the return lines. Hope this helps.