The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**D.PASSMORE** · 05-12-2015, 03:34 PM

Wow! For a bunch of off- roaders, I figured this would be a rather common exchange. So, this what Im looking at: On the stub shaft, it gets the metal slinger installed, the V-seal fits on the shoulder wear the metal slinger is pressed onto, seal lip facing the spindle and then the plastic spacer on the shaft. Question, is there a seal that fits oil/grease seal that is pressed into back of spindle? On the 72 models there is a seal.

05-12-2015, 03:34 PM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: Changing axles, front dana 44 Wow! For a bunch of off- roaders, I figured this would be a rather common exchange. So, this what Im looking at: On the stub shaft, it gets the metal slinger installed, the V-seal fits on the shoulder wear the metal slinger is pressed onto, seal lip facing the spindle and then the plastic spacer on the shaft. Question, is there a seal that fits oil/grease seal that is pressed into back of spindle? On the 72 models there is a seal. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)