The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-25-2012, 10:23 PM

This is the best I can do. It's straight out of the manual. From what I see it's showing the bottom heater core hose going to water valve then going to intake.
Top heater core hose going straight to water pump.
These are both for AC trucks, I don't know if a non AC truck heater hose route would be any differant are not.

12-25-2012, 10:23 PM	#32
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Heater core water hose routing This is the best I can do. It's straight out of the manual. From what I see it's showing the bottom heater core hose going to water valve then going to intake. Top heater core hose going straight to water pump. These are both for AC trucks, I don't know if a non AC truck heater hose route would be any differant are not. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.